Panasonic CID

[tinga1]

If a TDE is using LCOT8s and receiving lines via an AudioCodes device. Can the Panasonic send out CID from specific extensions.
I know I have done this with PRI but can it be done via LCOTs.
Another option I may have is to remove the Audiocodes device and register all lines as SIP trunks then can I supply caller ID per extension.any assistance would be appreciated

 

[obtsystems]

PRI and BRI will only allow you to send clip per extension on the same line.
You would have to check with your sip provider to see if it can be done on their service. but it is normaly sent from the header or a preset address per sip trunk