kabaks2013
Technical User
i have Panasonic KX-NS500 and Elastix server. i want to ude the Panasonic as a PSTN gateway only. can i do that using SIP trunking ? and how ?
thanks in advance
thanks in advance
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Panasonic & Elastix Integration
- Thread starter kabaks2013
- Start date
- Status
I have connected a Panasonic KX-TDA200 to a 3CX Phone system and to an Asterisk.
You should be able to do the same.
All i did was to plug the analog extensions from the TDA200 into a PSTN VoIP Gateway. The extensions from the TDA200 plugged into the VoIP Gateway became trunks to the 3CX Phone system or Asterisk and i could dial from 3CX/Asterisk direct to any extension on the TDA200 or even make outbound calls via the Trunks connected to the TDA200 (Trunks from the service provider connected to the TDA2000)
You should be able to do the same.
All i did was to plug the analog extensions from the TDA200 into a PSTN VoIP Gateway. The extensions from the TDA200 plugged into the VoIP Gateway became trunks to the 3CX Phone system or Asterisk and i could dial from 3CX/Asterisk direct to any extension on the TDA200 or even make outbound calls via the Trunks connected to the TDA200 (Trunks from the service provider connected to the TDA2000)
alwaysared
Technical User
Maybe you could create a SIP extension for each PSTN line on the NS500 then tell each line to go to their respective ext (eg Line 1 > Ext 200, Line 2 > Ext 201 etc.) Then using the settings for these extensions go to your Elastix box and create a SIP trunk for each one. Then when a call comes in to the NS500 it will ring the ext (trunk on the Elastix) and the Elastix will have the call.
- Status