Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Panasonic 1232

Status
Not open for further replies.

telllman

Vendor
Feb 9, 2010
337
CA
I am going to a client site -New to me with an old Panasonic 1232 White cabinet. Issue today is door box stopped working. Any special things I need to look at ??? If the cable is good can I test out from KSU ???

Tony
 
check to see if the outdoor box is corroded at the screws. other wise tone the line if its good start with a new door box. the card is still available i'm sure if you need to replace it
 
What type of card is it, Not that familiar with the older stuff ???
 
Is it a Digital 1232 or analog? 1232D on the cover is Digital. old or new trace the door box wire to the unit. Open it if.. you tested what I first said. Make sure the system's off. Then pull out the card, or the connector to the main unit if everything looks good "not corroded" then reinstall it. Power back the unit and test again, If it works your home free... but if not, order that card and replace it. No programming is needed most times but.... you know the drill.. Good Luck.













 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top