Paging

[powercom]

Hello all ,
How do I prepare Paging in KX-HTS32 I tried to request code *3301 for group1 I did not get to a result I think there is a path to follow .

Thank You So Much .

 

[daddybadger]

What handset are you trying to page from? *33 is the correct code unless it has been changed.

 

[powercom]

Hello Sir ,
The handset they used KX-HDV130 ;KX-HDV230 ;KX-HDV330 ;KX-HDV430 for example i try to make paging from kx-hdv130 to other handset
Thank you so much.

 

[daddybadger]

You can only page 4 HDV in a group, are any of the handsets remote workers?

 

[powercom]

Hello Sir ,
I have tried code *33 And it didn't work; How is this done and what are the settings to running Paging .

Thank You Very Much .

 

[daddybadger]

Setup the groups for the extensions [2-4] *correction*

 

[obtsystems]

The hdv phones are sip and the system can’t page them using codes

The HDV phones have a page option in them for 5 groups. You program the handsets to have broadcast ip for each paging group and each phone you want to page should have the matching IP.

You can only page from another hdv phone.

You can change one of the softkeys to be page and then select 1-5 to page the different phones/groups

They have to all be on the same lan/VLAN to work