Hey Everyone! so I am having a little issue maybe you have saw or ran into before. I have a hosted server edition IP office and phones in another hosted location. for paging I used a SNOM PA1 and a 3rd party endpoint license connected to an on site Bogan amplifier. And paging has no issues at all, but when I added the phones to the paging group it seems to only page the phones and not the SNOM (the phones are 9608g's H.323) I have changed the button programming to (Dial paging / Group paging) and no luck also the group is set to collective. No issues to get the phones to page or the Sip device just not both.... any thoughts? software version is 11.0.4.0
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Paging with SNOM PA1 Sip and H.323 Phones 1
- Thread starter Chris S
- Start date
-
1
- #2
TouchToneTommy
Vendor
On the SIP extension for the SNOM, change the "3rd Party Auto Answer" to "device auto answers"
- Thread starter
- #3
- Status
