Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Paging via Voicemail Pro with Looped Announcement 4

Status
Not open for further replies.

Noonyn

Technical User
Dec 29, 2022
1
BH
Hello Guys,

I have a customer with Voicemail Pro setup with IPO mainly to play pre-recorded announcements on SIP third party speakers. I have added a post dial action on VMPro to play a looping wave file on the SIP speakers if dialed with a shortcode and it's works perfectly. My question, is there a way to add a pause between each loop? We'd prefer to be able to play the announcement every hour, as opposed to having it repeat continuously.
 

thread940-1440913


Looks as if this can’t be done

You may have to use an external source for this
 
It can be done with an external clock device that causes a contact closure on a ringdown analog port that dials the shortcode of the module. I used this method for time tones in schools.

Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top