Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Paging through FXS port

Status
Not open for further replies.

sirroutesalot

Technical User
Oct 21, 2005
18
US
Hello,

We are currently connecting an FXS port to a Bogen UPAM paging module. When a caller dials the DN of this port and speaks, the system works great. If a caller dials the DN of this port but hangs up prior to speaking, the bogen plays reorder tone for 5 seconds or so over the paging system. Any suggestions on how to correct this. Voice port settings are pretty much default at this point.
 
I am having a similar problem with a Valcom paging adapter using an ATA for the analog port. Try changing your FXS to ground start. When somone dials tha access code, the FXS sends ring gen to the Bogen. When they hang up before the Bogen reacts, the FXS goes back on hook. Then the Bogen opens a path to the FXS and probably is pulling DT and bouncing to DT or re-order. Changing to ground start will stop this I think.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top