Paging system.

[techjohnny]

I see that port 31 is connected to our paging system, but where in the NEC UI do you specify what port to use for paging?

Port 31 is left blank, so it's not connected to any extension, but can't find that anywhere else.

SV8100.

Thanks!

 

[conxtel]

What is port 31 configured as, station or a trunk position?

Paging is typically done via the mini-jack on the front of the CPU or through a PGD unit. If your paging equipment is connected to a port, I would suspect it is a trunk position.