Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Paging system interface for VoIP/SIP integration on Partner ACS

Status
Not open for further replies.

dhazer

Programmer
Oct 20, 2006
48
Does anyone know a possible way to send a second paging or loudspeaker system's signal over the internet/network to a remote brach via some type of IP technology that can be integrated with the Partner ACS r7 system?

From here (scroll to the bottom at experts-exchange):

it says that you can use a plain and common analog phone, along with SIP device on each end like the Sipura SPA-3000 so that a phone can be used over the internet and still connect to Partner ACS.

I would like to do this but for the purposes of a second loudspeaker for a second location. Maybe instead of using a phone line, I could utilize an extension?

I'm already using a loudspeaker/paging system for the first and initial location, and that one will need to exist alongside of the new paging system that I'm talking about in this post. I've already specified in the Partner ACS that the phone line #5 is the loudspeaker (I think that's done in feature #617?). This may complicate things.

Any ideas on how this could be implemented are greatly appreciated!

Thanks,
Dan H.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top