Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Paging on an OPT11 mini 1

Status
Not open for further replies.

mbrio

Technical User
Nov 7, 2008
45
US
Hey, I am trying to create a key on a 3904 expansion module that will activate the overhead page. The "number" is 8352 but I can't find it and I don't know what it is. It's not a DN, right? and I don't think it is a rout.

Also, I want to program DNs that are on a different OPT11 that is connected via tie line but I get sch0371 or sch0375 stating there is "a shorter directory number already exists" when I attempt to add it as a SCN.
 
Paging can only be done via a Paging route programmed in. The BCM and Norstar systems had a function where you could have different types to select.

The directory number issue is because you are using a shorter number for your tie lines and it's best to capture a log file when doing DNB in LD 20 to see what has been programmed.

All the best

Firebird Scrambler
Meridian Programmer in the UK

Useful Nortel forum at
If it's working, then leave it alone!.
 
This is what I got for the paging rout:

ld 21

TYPE TLST
TKTP COT
ROUT 4
DES PAGING
TN 002 0 00 02 MBER 1 PAGING

LD 20
REQ: prt

TYPE: tnb

TN 2 2

DATE

PAGE

DES


DES PAGING
TN 002 0 00 02
TYPE COT
CDEN 8D
CUST 0
XTRK XUT
TIMP 600
BIMP 3COM
TRK ANLG
NCOS 0
RTMB 4 1

NITE
SIGL LOP
SUPN YES
STYP PIP
AST NO
IAPG 0
CLS UNR DIP WTA LPR APN THFD
P10 NTC

TKID
DATE 9 OCT 2008



Is there no way to program it to a key?
 
Print off the RDB in LD 21 for route 4. Look for the ACOD number. Once you have that, create either an ADL or Hotline key on your Digital phone and use the ACOD number.

That should work for you.

All the best

Firebird Scrambler
Meridian Programmer in the UK

Useful Nortel forum at
If it's working, then leave it alone!.
 
Firebird, you rock!! I was able to use the full 4 digits after setting it as ADL. This worked for the DNs too. Thanks!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top