Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Paging noise clicking and popping

Status
Not open for further replies.

ATIGUY

Programmer
Nov 25, 2014
3
CA
We hear clicking and noise from the page port. When we go on the page port right from the IP Office with a Butt-set we hear noise on the line
Any suggestions or direction. Paging system is VALCOM

 
disconnect the paging system and use the butt set only in call mode to see if the noise comes from the IPO

Joe W.

FHandw, ACSS (SME)


"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter
 
If you don't have an isolation I would seriously suggest getting one. The Valcom VMT-2. The IP Office puts out a voltage that Valcom units don't like. We include them on every install using a page port, as Avaya docs advise.

Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top