Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

paging issue

Status
Not open for further replies.
rongill

rongill

IS-IT--Management
Mar 9, 2007
70
CA
Hi,

User's at my branch use a 4 digit DN for paging. They call the number and it usually rings once and they are able to page overhead.

Now the number just keeps ringing .. any suggestions.
 
Sort by date Sort by votes
station level paging adaptor is not answering. trace jumper to unit and take appropriate action based on what you find out. could be ring generator, station pack, broke jumper, broke paging adaper or adaper power problem.
 
Upvote 0 Downvote
looks like the analogue port on the BCM was hung up. reset and good to go
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

wardy5
  • Locked
  • Question
Additional speaker off existing paging system
Replies
4
Views
328
wardy5
wardy5
S
  • Locked
  • Question
Nortel Meridian + Norstar Flash Issue
Replies
4
Views
760
Synapt
S
jtr4580
  • Locked
  • Question
Paging Trunk from Cloud Based System to a Carehawk School System
Replies
0
Views
332
jtr4580
jtr4580
BSmith01
  • Locked
  • Question
Nortel PBX Password Change Issue
Replies
6
Views
563
BSmith01
BSmith01
John Tel
  • Locked
  • Question
CS1K Signaling Server partition full /dev/hda10 (Not the normal /var issue). Directory not working.
Replies
4
Views
756
John Tel
John Tel

Part and Inventory Search

Sponsor

Back
Top