paging access code

[Kodaker]

we are setting up many networked PBX I have several numbers that conflict with numbers on the network. For example 72 is the paging access code in one switch, but I need 72xx in another switch.
is there any way to set up *72 or #72 as an access code. I know that * is a feature code set up in LD 57.
for emergency reasons we don't want to change drastically the code or change it to a new 4 digit number

I'm to sure if I explained this properly.
any suggestions would be appriciated

 

[janaya]

the hard part is the * and # are usually for FFC (Flexible Feature Codes) If you try to enter them you will get an error that they are invalid characters in an ACOD.

I don't know if this is possible.