page setup in Indesign CS3

[hacksauce]

I just upgraded to ID CS3 and am experiencing a problem that I find difficult to believe. The page that I view on the screen becomes displaced when I print it. To explain:
I open a new document and in setup select A4 as the page size.
In the work area I set the ruler origin to 0, both x and y to the top left hand corner of the page.
I place an object on the page and position it x = 50mm, y = 50mm using the tool bar at the top.
When I print the page, the objects position is 61mm and 61 mm from the top left hand corner.
This happens of all of the three printers that I use.
It does not happen in CS2

How do I align the printer to the document, I need very accurate results, plus or minus 1 mm.
Help file no use, I often wonder why they bother to include it.

 

[apepp]

...in page setup are all settings as they would be in CS2, page position option with centred turned on, marks and bleeds off etc, etc?

Andrew

 

[hacksauce]

Andrew,
I have duplicated the setup exactly in CS2 and the object appears on the printed page where is should. I positioned the object x = 60mm and y = 60mm. In ID3 the displacement is x axis 15mm and y axis 12mm, i.e. x = 75mm and y = 72mm. The origin is 0 at the top left hand of the page and the reference of the object is set to top left hand. I am having trouble in believing what I'm seeing. The results are the same on all three printers. I ran the same test on Corel draw and Publisher, everything as expected. I have contacted Adobe. No response. Value your interest and appreciate your help. Regards.