Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

packet loss for channel bonding when one cable unplugged

Status
Not open for further replies.

oceandeep

IS-IT--Management
Jul 6, 2000
69
GR
Hi,

I have channel bonding configured on RH AS3. But during my test, when I unplugged one cable, there was packet loss. If you do a ping, you can see it will last for about 5 to 10 seconds and then everything back to normal. I have checked system log file. The system is able to detect the interface down almost the same time I unplugged the cable. Could this problem caused by switch side? Or is there a way to prevent from packet loss or maybe just shorten the packet loss period?

Thanks!
- Jiang -
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top