Packard Bell Sound Card 1

[moogoo]

Hi,
I have an old Packard Bell Legend 204CD PC and am trying to do a clean win 98 install. Problem is that the CDROM is a MKE proprietary Interface and has to be connected through a sound card(model I don't know)and I erased the driver for the sound card. Any suggestions on the type of sound card that is in this thing and where may I get a driver from?

 

[pudda]

First, look at the board for an FCC ID number, or any other numbers/names that might be etched on the board.
Then go here to look for the manufacturer:

http://www.fcc.gov/oet/fccid/

Then go to DriverGuide

http://www.driverguide.com/

and look for drivers.
Good luck!

 

[Comtech]

It's an integrated sound/modem card, probably a Rockwell/PB thing. Look around

http://www.packardbell.co.uk/support/

and you should find drivers for it.
Don't bother with the US PB site, it's not there. Cheers,
Jim

http://members.cnx.net/reboot/

 

[moogoo]

Thanks All!

I went ahead and replaced the original MKE drive with an IDE CDROM and went straight to the mobo IDE controller it works fine