Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pacbell DSL/ Linksys Router/Windows 2000

Status
Not open for further replies.

Palava

IS-IT--Management
Nov 10, 2001
1
US
Please Help.
Recently purchased a Linksys Etherfast Cable/DSL Router (BEFSR11)1 Ethernet Port. I have Pacbell DSL, dynamic IP with PPPoE. I have 3 Windows 2000 pro machines on my network connected to a linksys 5 Port hub. Each machine on my network has manually assigned IP addresses 192.168.1.10, 20,30 and Gateway of 192.168.1.1
I connected my DSL Alcatel modem to the WAN port of my DSL router and my HUB is connected to the LAN port on the router. I also uninstalled Enternet/PPPoE Software supplied by Pacbell. Yet when I attempt to connect to 192.168.1.1 in my browser, I recieve page not found(Browser proxy settings are blank), neither am I able to ping the router at the same IP address.
Following this, I changed my machines to recieve IP from DHCP with Gateway set to 192.168.1.1 but this setting does not work because Win 2000 has that Auto IP configuration and assigns IP addresses in the 168.x.x.x range.

Please help, unable to call Linksys Tech support because they are closed by the time I get back from work and they dont open on weekends.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top