Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PABX Management inquiry
- Thread starter ryanmikel
- Start date
AvayaTier3
Technical User
yes, if the pc and g450 are configured correctly for network settings, cat 5 cable to eth port should work.
Using the services port on g450 to pc requires cat 5 crossover cable and would be the best connection method if the network access is an issue. From g450 prompt, you can use "session icc sat" and "session icc" to connect to CM.
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
45 years Bell, AT&T, Lucent, Avaya
Tier 3 for 35 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
Using the services port on g450 to pc requires cat 5 crossover cable and would be the best connection method if the network access is an issue. From g450 prompt, you can use "session icc sat" and "session icc" to connect to CM.
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
45 years Bell, AT&T, Lucent, Avaya
Tier 3 for 35 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
- Status
Similar threads
- Locked
- Question