PAartner acs 509 processor giving a very loud exccesive loud beep after a page is sent from an analo

[aarenot]

Any help would be appreciated. Using intercom 70 does not seem to have the issue, intercom *70 does the loud noise.

 

[cvrbob]

check your stations in calling group 1 for feedback

*70 IS paging and members of CG 1

 

[aarenot]

Tested with the only ext connected being the butt set at the phone system, and it still did it, and no paging speaker in the phone room.

 

[Dexman]

When I*70 is selected, paging occurs over an external system and over idled system telephones with speakers. I70 just accesses an external paging system.

The Partner ACS does send a "Splash" tone to the external paging system. When I*70 is used, the same tone is sent to System Telephones with speakers.

Could the louder beep be a result of either feedback or the sum of both System Phones and external paging broadcasting concurrently?

I "FEATURE 00"

http://dexman.webs.com/