Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PA equipment interface

Status
Not open for further replies.

DAS1512

Technical User
Jan 19, 2007
36
EU
Can anybody ever connected public address equipment to Meridian for mass announcement from telephone via some accesscode .

Can it be connected to COT card.

Please advise wht hardware may be required for this kind of an arrange ment.

DAS1512
 
the most common interface is a trunk card.. we use a valcom page unit between the two.. that gives us area control... the page system needs a 600 ohm imput.. if not you need a valcom or a impendence matching transformer.. radio shack, or a simular provider.. nortel have a trunk type pag, i use cot so i can set the timed force disconnect, set at two minutes due to analog stations that hookflash and put the overhead on hold..

if you need the code, let us know and one of us will post it.. (fyi) the most common access is acod, it could be a dsc or even spn if needed.. i've use dsc's to insert a single digit at times to give a single tone burst prior to voice.. that unit has a delay that cut off the 1st word of the announcement, the tone solved that problem..

john poole
bellsouth business
columbia,sc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top