P2P T-1 Up & Down Problem

[ThomasITMI]

We are running a P2P T-1 between offices - new install. Service provider didn't provide timing/clocking - we are providing it on each endpoint with Cajun P330Rs w/ 2DS1 mods. The T-1 was going down frequently while we were programming the Cajun switches the first day. Now that we are providing clocking from each Cajun - it still is going up and down intermittently - like its timing out? Service provider has run extensive tests - ALL ONES etc - and says it definately is on our end.

Any help? There isn't much tech help available for the Cajun equipment now that Avaya stopped supporting Cajun. Anyone know a really good Cajun tech? We need help in setting up the P330Rs w/ the X330W-2DS1 mods in them. We have a R9.5 si running VOIP phones and a remote physical office with (12)4612IPs and also passing data files over the P2P T-1.

Thanks.

 

[dyankee]

I would setup one t1 as a clock source and set the other to take timing from the network (provided by the other end)
You can't have two timing sources, for one thing they will never sync

 

[adminman3]

What came of this? Did you check your 'Change synchronization' command to see what your current clocking source is?