P2P remote site Needs Prioritization

[cknipe]

Does anyone have a sample config of how they have prioritized voice of thier Point to Point T1 setup. I have a customer who has a few phones in a remote office but uses a medical billing software across the point to point link. Thanks,

 

[slapin]

I assume Cisco routers

Something like this should be on both sides

ip access-list extended voice
permit ip any any dscp ef
permit ip any any dscp 44

class-map match-all 256k_map
match access-group name voice

policy-map T1_QOS
class 256k_map
priority 256 32000
set ip dscp ef
class class-default
bandwidth remaining percent 80

interface Serial0/0/0
service-policy output T1_QOS