P.R.I. 3.0 xc

[ctcfonman]

Can you put a p.r.i. on a mics 3.0 xc?
I know it will take T1`s but what about pri?

 

[westcoaster]

nope, I believe the first version of software was 4.0

 

[Arr]

MICS 3 will accept T1 cards and BRI cards.
Not too familiar with PRI programming so can't say whether the T1 can be channelized to PRI.

PhM

 

[exsmogger]

As westcoaster stated PRI was first supported on R4.0, but this release was "buggy" so use at least R4.1 if going to PRI. You will also need to purchase a PRI enabler keycode to activate PRI. Brian Cox
J & J Communications

http://www.jandjcommunications.com

brian@jandjcommunications.com

 

[sscott1234]

gota have 5.0 for pri. even 4.1 has some pri bugs on it. also remeber pri has itz own programing issues. make sure u upgrade the softwared before entering the pri keycode or it gets lost and nortel wont give another one. (learned that one the hard way

 

[ctcfonman]

thank you all.
i just wanted to conferm what i was being told by a tech help group.
todd