Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

OVR work in one PBX but not in other.

Status
Not open for further replies.

markxus

Technical User
Sep 14, 2006
34
PE
hi. we have two meridian op 11c IN DIFERENTS PLACES, in both pbx i want TO do OVERRIDE AND BOTHS SERVICES FROM ANALOG PHONES, IN THE FIRST PBX ALL'S OK AN THIS IS THE SET OF TN:

FIRST PBX - OVR OK
-------------------
TN 005 0 00 01
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 2001 0 MARP
AST NO
IAPG 0
HUNT
TGAR 1
LDN NO
NCOS 0
SGRP 0
RNPG 0
XLST 2
SCI 0
SFLT NO
CAC 0
CLS TLD DTN FBD XFD WTA THFD FND HTD ONS
LPR XRD CWD SWD MWD LPD XHD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDA AGTD CLTD LDTD ASCD
MBXD CPFA CPTA UDI RCC HBTD DDGA NAMA MIND
NRWD NRCD NROD SPKD CRD PRSD MCRD
EXR0 SHL SMSD ABDD CFHD DNDY DNO3
CWND USRD CCBD BNRD OCBD RTDD FAXD PGND FTTC
PLEV 02
AACS NO
MLWU_LANG 0
DATE 28 SEP 2006

SECOND PBX - OVR DONT WORK
--------------------------

DES FASSIL
TN 007 0 00 14
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 2046 0 MARP
AST NO
IAPG 0
HUNT
TGAR 1
LDN NO
NCOS 0
SGRP 0
RNPG 0
XLST 0
SCI 0
SFLT NO
CAC 0
CLS TLD DTN FBD XFA WTA THFA FND HTD ONS
LPR XRA CWD SWD MWD LPD XHD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDA AGTD CLTD LDTD ASCD
MBXD CPFA CPTA UDI RCC HBTD DDGA NAMA MIND
NRWD NRCD NROD SPKD CRD PRSD MCRD
EXR0 SHL SMSD ABDD CFHD
CWND USRD CCBD BNRD OCBD RTDD FAXD PGND
PLEV 02
AACS NO
MLWU_LANG 0
DATE 16 SEP 2006
**********************************

IN THE SECOND PBX IN THE TN 07 14 I CHANGE THE DIFERENCES WITH FIRST PBX: THEN CLS XFD THFD XRD.

THE CLS DNDY DN03 and FTTC I DIDN'T DO IT (ERROR)

AFTER THE CHANGES AND TRY OVR IN ANALOG PHONE, IN THE SECOND PBX OVR DONT WORK.

OVR ANALOG PHONE PROCEDURE:

NUMBER PHONE (XXXX)
BUSY
FLASH
55 (code ovr)

in first pbx all's ok, in the second one don't work ovr from this analog phone.

why??????????
 
Check the Flexible Feature Code (FFC) in second PBX.
LD 57
Req PRT
Type FFC
Cust
Code OVRD

It will show the override code. Might be different or not assigned.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top