Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
OVL 111
- Thread starter zulu69
- Start date
It depends on the messages after the OVL111.
OVL0111
The Overlay area is being used. The data output with the OVL111 are
defined below.
1. OVL111 00 IDLE = System is idle. A login will result in a ">"
prompt.
2. OVL111 xx BKGD = Overlay area is currently executing background
task (Overlay nn). A login will result in a ">" prompt indicating that
background task has been aborted and the Overlay loader is ready for
further commands.
3. OVL111 00 TTY x = TTY. x has control of the Overlay area. No
Overlay program is loaded.
4. OVL111 nn TTY x = TTY. x or maintenance set has control of the
Overlay area. Overlay program nn is loaded. DO NOT load in until user
has been identified and given a chance to complete his task or to
stop.
5. OVL111 00 SL-1= maintenance set has control of the Overlay area.
No Overlay program is loaded.
6. OVL111 nn yyy = System is automatically executing a maintenance
task.
DO NOT login unless absolutely necessary, until these tasks are
completed. They may be essential to maintain system integrity. Recheck
system status by pressing the carriage return key again after a few
minutes.
The value yyy may be:
1. MID-daily midnight routines are scheduled
2. ALRM-system alarm has been triggered
3. AUD-system requires software audit
4. CDR-system requires test of CDR facility
5. PBXT-PBXT message waiting tests
6. SMFR-soft memory failure recovery
If the input device is an SL-1 telephone, OVL111 is represented by a
busy tone or overflow tone. The telephone can be returned to the call
processing mode by going off-hook, then on-hook. This procedure is
useful if you do not wish to abort the current Overlay activity.
Severity: Info
Ronald
OVL0111
The Overlay area is being used. The data output with the OVL111 are
defined below.
1. OVL111 00 IDLE = System is idle. A login will result in a ">"
prompt.
2. OVL111 xx BKGD = Overlay area is currently executing background
task (Overlay nn). A login will result in a ">" prompt indicating that
background task has been aborted and the Overlay loader is ready for
further commands.
3. OVL111 00 TTY x = TTY. x has control of the Overlay area. No
Overlay program is loaded.
4. OVL111 nn TTY x = TTY. x or maintenance set has control of the
Overlay area. Overlay program nn is loaded. DO NOT load in until user
has been identified and given a chance to complete his task or to
stop.
5. OVL111 00 SL-1= maintenance set has control of the Overlay area.
No Overlay program is loaded.
6. OVL111 nn yyy = System is automatically executing a maintenance
task.
DO NOT login unless absolutely necessary, until these tasks are
completed. They may be essential to maintain system integrity. Recheck
system status by pressing the carriage return key again after a few
minutes.
The value yyy may be:
1. MID-daily midnight routines are scheduled
2. ALRM-system alarm has been triggered
3. AUD-system requires software audit
4. CDR-system requires test of CDR facility
5. PBXT-PBXT message waiting tests
6. SMFR-soft memory failure recovery
If the input device is an SL-1 telephone, OVL111 is represented by a
busy tone or overflow tone. The telephone can be returned to the call
processing mode by going off-hook, then on-hook. This procedure is
useful if you do not wish to abort the current Overlay activity.
Severity: Info
Ronald
- Status
Similar threads
- Locked
- Question
- Locked
- Question