I have a customer who cannot dial 13 digits for overseas calls...quits dialing after 12 digits. They have a Legend 7.0 with a PRI. The dialtone provider tested and says the switch is prevented from dialing 13 digits. Where in system programming do I go to allow a max of 13 digits?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
overseas calls - cant dial all digits
- Thread starter pjolly
- Start date
Check under Lines and Trunks,PRI,Outgoing tables,Special services,Delete digits,BY default it will delete 3 digits on all entry,change that and the system will send exactely what you dial ,and will not absorbed any digits.Give it a try it should work. Good Luck!
- Thread starter
- #3
Make it delete Nothing(0). Good Luck!
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question