Looking for programming assistance for call forwarding to a TN in France from NNPA 403 over the PSTN. Switch is a new Norstar BCM400. All call forwards work to North American destinations but not to an overseas destination. (We will use the IP capabilities of the platform once once a fibre Internet access is installed in about a months time but need to get this PSTN connection working in the mean time). Can anyone assist? - THANKS!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Overseas Call Forwarding on a BCM400
- Thread starter Dave455
- Start date
Should be the same as forwarding to a number in the States. Make sure you have a destination code for international (such as 9011).
Where are you forwarding from? Phone set, Voicemail? If voicemail, make sure your restriction filters allow international dialing. Also make sure your active application DN's have access to the line pool that the PSTN trunks are in. Last but not least, make sure your carrier isn't blocking international calls....
Where are you forwarding from? Phone set, Voicemail? If voicemail, make sure your restriction filters allow international dialing. Also make sure your active application DN's have access to the line pool that the PSTN trunks are in. Last but not least, make sure your carrier isn't blocking international calls....
- Status
Similar threads
- Locked
- Question
- Locked
- Question