Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Overlapping fields in CE10

Status
Not open for further replies.

satshergill

Programmer
Jan 25, 2002
34
GB
Having upgraded from CE8.5 to CE10, Some of my reports have fields where data is overlapping.

Does anybody else find the same behaviour. Its only a problem on any of the viewers with the Pc having no installation of Crystal reports

Major problem because I have 200 users with 100's reports and historical instances.

Can someone else check this on the installation of CE10 to see if its a global bug or just a standalone on my machine


Many thanks in advance
 
Have you checked if the font you are using in the reports is available on the PC's that don't have CR installed? If they are not installed, it may be trying to use a different font at a larger size.

~Brian
 
The report is using Arial and all windows 2000 pro machines
have Arial installed

Have you checked this on your system??/
 
I have not checked this on my machine because I do not have CE 10 installed here. I have seen issues with non standard fonts being used and then viewed on a machine that didn't have the font installed.

Which viewer are you using to view the reports? At one job I was on, there were viewing issues in CE 9 with DHTML viewer when you viewed reports that had mulitline text boxes. I have no idea if they fixed it or not in 10. If you are using the DHTML viewer, try using the ActiveX viewer and see if the same problem occurs.

~Brian
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top