Overlap dialing problem - SOLVED

[michelepin]

Hi all,

i've experience some problems with overlap dialing on our link from MD110 to a Patton SmartNode GW.

This is the MD110 config for the route:
<RODDPEST=ALL;
...
50 10 100500000000025000000000 0 1 0
51 10 100500000000025000000000 0 1 0
52 10 100500000000025000000000 0 1 0
...

<RODAP:ROU=10;ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
10 SL60 H'00000350 H'04080000 H'06710000 NO

END

<ROCAP:ROU=10;ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
10 011000000000001 5 0111000001 0 30 128 00151515 111110100031 101100

END

<

The strange thing is that on calling 50xx numbers (we have 4 digits extensions) it works well. The issue was experienced on 51xx and 52xx.

Any help ? Suggestions ? Advices ?

Thanks, Michele

--
BLOG @

http://www.zerozone.it

 

[michelepin]

I forgot to clarify that the issue happens only on overlap dialing, from analog extensions. From digital phones, external calls or on recall (***) it work as expected.

Michele

--
BLOG @

http://www.zerozone.it

 

[himdp]

What number length data do you have set for 50, 51 and 52? Print using NADAP:NUMTYP=NL;
If MAX and MIN are the same, the system will use en-bloc sending.

 

[michelepin]

Oh, NADAP reply:

NADAP:NUMTYP=NL;NUMBER ANALYSIS DATA
EXTERNAL NUMBER LENGTH DATA
EXTERNAL NUMBER NUMBER LENGTH
11113 9 - 9
50 4 - 4

END

<

So it miss 51 and 52 series... how i can set it up ?

Michele

--
BLOG @

http://www.zerozone.it

 

[michelepin]

Thanks, i've solved setting numer lenght in 51 and 52 series:

NANLS:EXL=51,MIN=4,MAX=4;
NANLS:EXL=52,MIN=4,MAX=4;

Michele

--
BLOG @

http://www.zerozone.it