Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

overhead paging

Status
Not open for further replies.
letman2

letman2

Technical User
Mar 15, 2007
211
US
Customer wants a sip trunk connection for there new paging system. We are CM 6.1 with no sip service. WE might be able to use a pri instead. Any ideas?
 
Sort by date Sort by votes
You might be able to build a direct SIP trunk in CM, or use an Audiocodes MP112 and see if they have a reference note to use SIP to that and an analog port off your PBX.
 
Upvote 0 Downvote
You could also set up a SNOM PA1 via a Third party SIP extension. You basically just dial the extension of the SNOM PA1 and it connects to your PA amplifier via s rca cable. It sounds amazingly crystal clear. I have it set up on an IP Office.

Joseph Sus Jr. Nortel Emetrotel Consultant
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

C
  • Locked
  • Question
Avaya Group Paging Delay for 7-10 Seconds for DialTone
Replies
2
Views
267
ZeroZeroOne
ZeroZeroOne
fedphone
  • Locked
  • Question
Paging Zone Question
Replies
2
Views
253
fedphone
fedphone
tmfranco32
  • Locked
  • Question
Bogen Paging
Replies
2
Views
237
dialtonebone
dialtonebone
joeb5110
  • Locked
  • Question
Legacy Avaya paging
Replies
1
Views
199
AvayaTier3
AvayaTier3
afig
  • Locked
  • Question
mm716 analog port overhead paging
Replies
2
Views
185
jimbojimbo
jimbojimbo

Part and Inventory Search

Sponsor

Back
Top