Overhead paging Access using digital port

[cronrun]

Is there any device that will use a digital port from an Option 11c that will allow connection to the overhead paging system. I do not want to add a trunk card or an analog line card, but I do have some digital ports available.

 

[StoneColdphoneman]

The only way to access over head paging system you need Trunk card no any other way.All you need is one trunk setup as paging.

 

[PERRYPJ]

SET UP A 2616 WITH AUTO ANSWER, PLACE A MICROPHONE IN FRONT OF THE PHONE IN THE ON POSITION ALL THE TIME. BUT OF COURSE THIS WOULD HAVE TO BE IN A VERY QUIET PLACE.HE HE HE HE

OLD ROLMEN WORKING ON NORTELS

 

[bugdog]

go here

http://www.valcom.com/

look at the V9940 it may help

 

[Arr]

You could do this from a 500 port using a Bogen TAM B. Simple and effective. Works every time.

PhM