Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

OV_Application_Down not reaching MS

Status
Not open for further replies.

pranavsingh

Programmer
Apr 19, 2002
8
0
0
IN
Hi All,
I have set event forwarding on CS for OV_Application_Down event. What I am expecting to see on the MS is whenever an openview service goes down on the CS, CS would forward an OV_Application_Down event to the MS.
The event is configured as a log and display Major alarm both on the CS and the MS.

When I test with xnmtopoconf -test the CS is shown as configured for event forwarding and passes all tests. But when such an event is generated, it is not forwarded to the MS. I tested with network capture and did not see any TCP traffic between the MS and CS. All are SNMP get and responses.

Any ideas why this might be happening.

Thanks,
Pranav
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top