Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
OUTSIDE CALLER ID
- Thread starter adip257
- Start date
- Thread starter
- #4
acewarlock
Technical User
Please Don't use all CAP's as it is hard to read and concidered Shouting.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
tnphoneman
Vendor
Your Dchannel must be NI2 and the RCAP must have NDS.
PhonemanSam
Technical User
Print your config record. Look for CLID = Yes. If set to No
us LD 17. to change. If you have PRi's you need to make a change to the D-channels
us LD 17. to change. If you have PRi's you need to make a change to the D-channels
- Status
