Output message Changing Ext Name

[telklass]

Hi all,
Be aware that just a few days ago, i started to typing basic cmd in CS1K.
I am getting this output messaging while trying to change my extension name on CS1K,

Here is the Output.

MEM AVAIL: (U/P): 97533178 USED U P: 5590113 529058 TOT: 103652349
DISK SPACE NEEDED: 730 KBYTES
.

Thanks to help me on this output.
But i am gonna copy/paste it on Google ,though.


Thanks !

 

[KCFLHRC]

It's just an informational message.

 

[telklass]

Ah , realy, i think so. Either the ext or the TN is not correct, by the way do you know the overlay to print out an extension number. My doubt is on the extension .

Thanks !

 

[KCFLHRC]

You can print out an extension DN in LD 20

 

[telklass]

Okay_ It also display the TNs and all the the existings extensions.

Thanks !

 

[telklass]

Hello @KCFLHRC

I can see the name has changed on the output from the console, but is does not changed on the screen phone.
Do i have to reboot the deskphone ?

Thanks !

 

[KCFLHRC]

Nope, no reboot needed. You can also just change names in LD 95, much easier than changing the whole key if that's what you are doing.

 

[telklass]

Yes , change has made for the extension_ But i want to display on the screen phone.
Is there a way ?

THanks !

 

[KCFLHRC]

What kind of phone? Sounds to me like you are talking about Key Labeling, that is done at the phone itself

 

[Firebird Scrambler]

Assuming that your phone or the extension that has a display actually has a proper digital phone with a screen, then make sure that the sets CLS = CNDA to allow the display to work.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin

 

[telklass]

Fine,
Currently i am trying to apply change in a AVAVA 1140E IP Deskphone.

Thanks !

 

[KCFLHRC]

I truly have no idea what you are trying to do. Are you talking about the name that is displayed when you call that phone or are you talking about the information on the screen of this particular phone?

 

[telklass]

For both_ On the screen phone, the name to dispaly as well as for internal call the called must see the name display on his screnn. Like extension \ deskphone configured in IPO 500.
Thanks !

 

[KCFLHRC]

What?????????? Are you talking about an IP Office or CS1K??

 

[telklass]

Nope, CS1K _ I mean when 2 extensions are configure(e.g 9600 series ) into the IPO both users can see the name display on the phone screen.

Thansk !

 

[Firebird Scrambler]

I think you really mean the RCAP setting on the link between the CS1K and the IPO.

This old record might give you a clue

CS1000E rls 4.5 with a QSIG link from the MG1000T to a third-party switch
Users on the third-party switch dialling a set on the CS1000E did not see the Called Party name displayed on ringing, only after call answer.

Changed RCAP on the VDCH to ND3 on both the CS1000E and the MG1000T to resolve.

ND3 ensures the same level of service between the MCDN Name Display and QSIG Name Display supplementary services.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin