OUTing a LDID

[toolbox212121]

Anybody know how to out a LDID? I was testing it out and put my full number in just to test and it worked but now I want to set it up correctly with our DID ranges. I looked in LD 90 and there is an OUT command for the load but I do not want to out AC1 or something. It's not a big deal to just leave it there but I would like to clean up the switch.

 

[GHTROUT]

Here is me printing one, then removing it, then printing it again

[tt]>ld 90
ESN000

MEM AVAIL: (U/P): 23216260 USED U P: 4966047 375001 TOT: 28557308
DISK SPACE NEEDED: 416 KBYTES
2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED LD43 - BKO)
REQ prt
CUST 0
FEAT net
TRAN ac1
TYPE npa

NPA 1212

NPA 1212
RLI 10
DENY 976

SDRR DENY CODES = 1
ITEI NONE



MEM AVAIL: (U/P): 23216260 USED U P: 4966047 375001 TOT: 28557308
DISK SPACE NEEDED: 416 KBYTES
2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED LD43 - BKO)
REQ chg
CUST 0
FEAT net
TRAN ac1
TYPE npa

NPA 1212
RLI
SDRR deny
DENY x976
DENY
SDRR
ITEI

NPA


MEM AVAIL: (U/P): 23216268 USED U P: 4966047 374993 TOT: 28557308
DISK SPACE NEEDED: 416 KBYTES
2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED LD43 - BKO)
REQ prt
CUST 0
FEAT net
TRAN ac1
TYPE npa

NPA 1212

NPA 1212
RLI 10
SDRR NONE
ITEI NONE


MEM AVAIL: (U/P): 23216268 USED U P: 4966047 374993 TOT: 28557308
DISK SPACE NEEDED: 416 KBYTES
2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED LD43 - BKO)
REQ
[/tt]

--
Nortel Resources at GHTROUT.com World Famous!
--

 

[GHTROUT]

Ooops, same applies between DENY and LDID. At SDRR, enter LDID

--
Nortel Resources at GHTROUT.com World Famous!
--