Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
outgoing lines for pri
- Thread starter dsldillon
- Start date
Only incoming target lines can appear on a phone. To access PRI you must allow access to PRIA. If you check the faq's I think theres a faq that explains how.
When I try to dial an outbound long distance call after pressing the last digit, the call disappears from the screen and it goes back to date/time. Incoming calls work fine. Outbound toll fre hang with dead air.
Long distance carrier does not report a problem. When I try to use 10 10 to reach a different carrier, I get the same dropped call. Is it my equipment? How can I troubleshoot?
Long distance carrier does not report a problem. When I try to use 10 10 to reach a different carrier, I get the same dropped call. Is it my equipment? How can I troubleshoot?
Check the faq I believe you must build a route for the PRI to work properly.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
