Outgoing CLID 1

[Alaskatelecom]

Greetings all, looking for a little assistance if possible.

I've got an extension that is currently sending out our main TN (XXX.1234) for the company when making outbound calls.
I would like to change this over to have the extension send out it's own extension (XXX.2755)

I've done some looking in the system, but can not find anything obvious for this.

Any assistance would be greatly apprecited.

Thank you

 

[bignose21]

change public-unknown-numbering trunk-group xx y

xx = Trunk Group
y = leading digit

so for example you might have a 7 digit DN 3331000 in the above table you may have

Ext Len 7
Ext Code 333
Trunk 1-4 (single trunk or range of trunks here 1 to 4)
CPN Prefix 3331234
Total CPN Len 7

then 3331234 would get sent, the ext code is best match

 

[Alaskatelecom]

Thank you for your help bignose21
With the information provided I was able to figure out how to add/change/remove entries and all has been successful.
Much appreciated