Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Outgoing CLID

Status
Not open for further replies.

lapakhora

MIS
Jan 18, 2012
294
PK
We have a CS1K tied with a latest IPO using the SIP (Session/System Manager). The IPO extension starts with digit 5, In CS1K We have made a DSC= 85 (8 is the access code of SIP route) and calls are going to IPO OK. At IPO extension the incoming CLID is showing the extension number of CS1K. Now for some reason the IPO admin wants us that we must send 77 with each incoming CLID, i mean 77+extension no of CS1K.
Can somebody help?
 
If you are on 7.6 the setup a CMDB in LD 86 and assign it to the RLI you use to route the 85 DSC. You can add 77 to the CLNG (Calling) number.
 
Sorry for response as I was away. Let me check the tip you referred.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top