We have a TDA100 ver 3.0008 with a PRI23 ver 1.0009 card that doesn't seem to send out CLID name via the PRI. I see a line just before "Calling Party Number" in the ISDN/QSIG trace that looks like this:
([Inv] id= 80 op= 0(CallingName(PRI23))
I see the exact same line on a PBX where calling name is working when calling out from an extension where the name is blank.
Any ideas?
-----------------------------------
Telephone & computer wiring/Cat 5E cabling in Calgary, AB
([Inv] id= 80 op= 0(CallingName(PRI23))
I see the exact same line on a PBX where calling name is working when calling out from an extension where the name is blank.
Any ideas?
-----------------------------------
Telephone & computer wiring/Cat 5E cabling in Calgary, AB
