Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Outgoing ACL

Status
Not open for further replies.
WanderingSailor

WanderingSailor

IS-IT--Management
Nov 6, 2001
21
0
0
US
Just a general question...I was reviewing one of our router ACLs and discovered that none of the interfaces specify our outgoing ACL (101) as applying to them...Our incoming ACL (100) is applied to a specific port, but not 101...Does this make 101 an implied ACL for the same port that uses 100, or does it apply to all ports?

Thanks for the discussion...
 
Sort by date Sort by votes
You have to specifiy the access list on each individual interface. If an interface does not have an access list specified, then it will not use that access list.

I believe that answers your question...
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Mogles49
  • Locked
  • Question
Firewall ACL question
Replies
1
Views
53
burtsbees
burtsbees
acabezas2014
  • Locked
  • Question
Create ACL for ip range
Replies
2
Views
57
acabezas2014
acabezas2014
HardTrickySecurity
  • Locked
  • Question
How to allow all outgoing traffic and block all incoming traffic with access list?
Replies
2
Views
62
navypop42
navypop42
hunt3rxhunt3r
  • Locked
  • Question
ACL to allow address range access to internal address range behind dynamic nat ip
Replies
0
Views
38
hunt3rxhunt3r
hunt3rxhunt3r
xdxml12
  • Locked
  • Question
ACL
Replies
3
Views
30
xdxml12
xdxml12

Part and Inventory Search

Sponsor

Back
Top