Outbound Lines on MICS - Analog Lines on 2 4 port cards

[gnomeKC]

Have a total of 6 lines. All are tested from the CO both in and out with a Butt set. On DN's have All 6 lines set to appear and ring.

Phone calls in to lines 3-6 ring on line 1... - Odd. Trying to access Lines 3-6 on a handset gives no dialtone.

New defaulted MICS 7.1 is the set up.

Have been doing PRI cards too long and must be missing something It is as if the inbound analog lines are rolling up but not providing dial tone out.

So - need a thought if possible on where to start exploring.

Thanks,

 

[gnomeKC]

Additional Info

All inbound calls come into Line 1 on the phones right now instead of on their assigned line number 1-6. All numbers ring and calls can be answered.

Outbound, I can only get lines 1 and 2 to give me dialtone, even though I can attach a butt set to those lines and get dialtone and call out directly. BUT only 1 and 2 give dialtone on the handsets

 

[gnomeKC]

STUPID ME.

1/2 SkipSkip 3/4 SkipSkip 5/6 SkipSkip 7/8......

 

[gnomeKC]

So - all is well.

Client didn't inform me that they had forwarded lines 3-6 back to line one last night. So - that is why calls were coming into only lines 1 and 2.

So - Closing this thread.