Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Outbound Caller ID

Status
Not open for further replies.

jbernhard

IS-IT--Management
Joined
May 26, 2011
Messages
3
Location
US
I'm not very experienced with phone systems so please excuse my ignorance.

Right now our provider is handling outbound caller ID. They will allow our system to handle it but I'm not sure how it is currently setup. How can I check how the system is currently configured for outbound caller ID?

My ultimate goal is to have a small number of stations probably less than 10 show the full DID for outbound caller ID but the rest of the stations show our main telephone number.

We have 2 PRIs

Software version R010i.01.0.032.3
G3 V10

Please let me know if you need anymore info and thank you in advance.
 
Do 'display isdn public-unknown-numbering' to see what's currently assigned. To change it, do 'change isdn public-unknown-numbering'. You can do either blocks of numbers or individual stations.

Kevin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top