predding42
IS-IT--Management
How do you change the outbound caller id on certain phones so that some phones call out from one number and some from another?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Outbound Caller ID 1
- Thread starter predding42
- Start date
- Status
-
1
- #2
Below is what you will need to add to the dial plan. You will also need to make sure that the extensions 1000 and 1001 in this example are configured to use this pre-translator for callerID after adding it to the dialplan
PreTranslator Create 2 Outbound Caller ID
PreTranslatorISDNNumberType 2 2
/ PreTransId Entry Digits
/ ---------- ----- ------
PreTranslatorEntry Create 2 10 1000
PreTranslatorEntry Create 2 11 1001
/ PreTransId Entry OperId Operation Value
/ ---------- ----- ------ --------- -----
PreTranslatorOperation Create 2 10 1 replace 3231237890
PreTranslatorOperation Create 2 11 1 replace 3231231234
PreTranslator Create 2 Outbound Caller ID
PreTranslatorISDNNumberType 2 2
/ PreTransId Entry Digits
/ ---------- ----- ------
PreTranslatorEntry Create 2 10 1000
PreTranslatorEntry Create 2 11 1001
/ PreTransId Entry OperId Operation Value
/ ---------- ----- ------ --------- -----
PreTranslatorOperation Create 2 10 1 replace 3231237890
PreTranslatorOperation Create 2 11 1 replace 3231231234
- Thread starter
- #3
predding42
IS-IT--Management
That resolved my dial-plan issues exactly. Thank you.
- Status
Similar threads
- Locked
- Question
- Locked
- Question