Outbound caller I.D

[ethereal112]

I just inherited the call manager 4.1 and I have an NEC background. One thing I need to do is have outbound caller I.D disabled or set to a default number, how do I do this? another one is getting rid of that second dialtone when you call out. Thanks all

 

[T1PSTN]

Calling line ID can be set in the route points i.e. gateway config, route list config, route group config. CLID entries in those objects should override any station-level CLID settings if I remember correctly.

Secondary dialtone can be disabled at the route pattern config. It's a check-box. You will have to do it for each one i.e. 9.1xxxxxxxxxx, 9.xxxxxxx, 9.1800xxxxxxx, etc.


--T1PSTN

 

[pndscm]

T1PSTN, actually the phone settings over ride the RL, RG and Gateway settings I'm pretty sure. The more granular the setting, the higher priority it has.

 

[ethereal112]

Will changing these settings affect all stations and will I have to reboot call manager? I would like to have caller I.D disabled for certain stations. Thanks guys