out going caller ID

[asguyas]

Ok I know this topic has a long history and I have read most of it. My problem is we have one definity 5.2 running multiple clinics with in one hospital, evey outgoing call displays the main hospital number all out going calls go out one trunk group. I have started making the caller id changes on individual extensions however I only have a total 60 spots the site manager will let me fill. I understand that I could do a range to cut down on the spots used for individual exts but--- station 4200 - 4210 need to show one number 4211-4215 a different number and list goes on for almost 700 stations. Can I make each individual clinic a group, and any call coming out of group x displays a number? or does anyone else have an idea that would work better?

 

[DAVIDPAYNE]

I show that you can have a max of 9999 entries in the Public/Unknow

 

[asguyas]

Really maybe I am doing it wrong? I enter 'ch pub 4' it comes up with only two pages and a total of 60 enterys. is that wrong?

 

[DAVIDPAYNE]

When you do a "chan pub 4", is the 2nd page full are empty?

 

[asguyas]

not full yet but will be

 

[Tolson]

When you enter the command "cha pub 4" the system will only ever show two pages but if you look on the first page on the right side, it will tell you how many entries are used and the maximum number available in the system. If both screens are full then you need to be more specific on the extension number you are looking for to change. You can do a "li pub" to display all entries.

 

[asguyas]

Ok thank you very much. Iknow see all the entries I made yesterday on page 2 have migrated, leaving page two open and clean.
Very helpfull, thanks to all.

 

[asguyas]

after making several changes, I realized I goofed up one ext. The problem is I go 'ch pub 4' and it only shows the first 30 exts. How can I change the outgoing ANI for ext 4803 when it only shows the first 30?
I have tried 'ch pub 4 start 4830' but with no luck

 

[asguyas]

never mind I found it.

'ch pub 4 ext-digits 4803'