Hello, I wanted to see if anyone had answer to this question on a BCM50 with an expansion cabinet with a DTM module:
I have my call routing setup for LD and Local to route out a pool groups for each call type. When you dial a local number to route out the local lines, you dial number and then it grabs a line, but with the LD calls it gets the first 4 digits and you get a split second of dial tone then you finish dialing the number and it makes the call. My question is how to get rid of that brief dial tone and have it take all the digits first before dialing the numbers.
I have my call routing setup for LD and Local to route out a pool groups for each call type. When you dial a local number to route out the local lines, you dial number and then it grabs a line, but with the LD calls it gets the first 4 digits and you get a split second of dial tone then you finish dialing the number and it makes the call. My question is how to get rid of that brief dial tone and have it take all the digits first before dialing the numbers.
