Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

otm vt220 access to pbx

Status
Not open for further replies.
teekow

teekow

Vendor
Nov 23, 2003
427
0
0
US
I have an option11 connected to a modem and I can use procomm and hyperterminal with no problems. I connect at 9600 with those programs. When I use VT220 from OTM, it says it connects at 28800 or 34000 and I cannot do anything on the screen once it connects. In the system properties, it does say connect at 9600 for the modem connection. Any ideas as to why I cannot use OTM to dial up to my switch?

Rob
 
Status
Not open for further replies.

Similar threads

Wally612
  • Locked
  • Question
Remote access to Option 11-81
Replies
0
Views
80
Wally612
Wally612
huddleto
  • Locked
  • Question
OTM Telecom Billing System won't open
Replies
2
Views
107
esoare
esoare
jinxthecat
  • Locked
  • Question
registry for OTM 2.20.78
Replies
0
Views
74
jinxthecat
jinxthecat
SAW1
  • Locked
  • Question
Nortel OTM Telecom Billing Reports
Replies
2
Views
92
curtok
curtok
nconick
  • Locked
  • Question
OTM 2.2 CDR for internal calls
Replies
0
Views
72
nconick
nconick

Part and Inventory Search

Sponsor

Back
Top