OTM - DSC's and Reserve DN's Suggestions HELP !!!

[kurfarit]

New install of OTM 2.2 is complete .
When I Add a new set exsample 3904 the DN range poole that is given also contains numbers that are distance steering Codes . what is the procedure to remove these numbers so they are become available . Could cause a boo boo that's for sure. Thanks for any help in advance.....

 

[SL1M1]

I would suggest progamming of this kind to be done direct rather than using OTM.

Looks as if you have DSC set up which conflict with what you are trying to assign as an extn?

To take out DSC / LSC & TSC's you need to LD 87 but be careful these maybe used for something and have been set that way with RouteLists and DigitManipulation Tables.

Suggest you pick out what's spare from the list:-

LD 20
REQ PRT
TYPE LUDN (List Unused DN's i.e.Spare)
CUST x

Cheers!!