I am not sure which forum to post this in but here goes...
I'm having a problem getting OSPF to work between an ASA5505 and a Cisco 2811 Router. I know that OSPF works on the router as it picks up the neighbors over a point to point and VPN tunnels. It will not pick up the 5505 though. They are all Area 0 BTW.
Here is how it is connected: 5505 - Inside goes to 2970 Switch - Goes to 2811 Router. Is the switch blocking OSPF from working? I have the exact same setup at several other locations but I'm not using the same switches at those. Let me know what other information you may need to help me troubleshoot this.
thanks in advance everyone!
I'm having a problem getting OSPF to work between an ASA5505 and a Cisco 2811 Router. I know that OSPF works on the router as it picks up the neighbors over a point to point and VPN tunnels. It will not pick up the 5505 though. They are all Area 0 BTW.
Here is how it is connected: 5505 - Inside goes to 2970 Switch - Goes to 2811 Router. Is the switch blocking OSPF from working? I have the exact same setup at several other locations but I'm not using the same switches at those. Let me know what other information you may need to help me troubleshoot this.
thanks in advance everyone!