Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Osb with Hipath 4k

Status
Not open for further replies.

LAAZ

Systems Engineer
Aug 4, 2021
111
IN
Dear friends
Osb x8 V2 integrated with OS4K v4

Sip trunk connected in Osb
Require Pass through to OS4k

Calls between Osb and 4k working fine without lcr in osb

Is anyone guide me please to pass the calls to Hipath 4k

If some one dial 123456789 and extension 6789 is in Hipath
The calls must land in Hipath extension.

Thanks in advance
 
Dear massvis
Yes
I have
 
Then to configure the SIP protocol for the HG3550 via the Web, you must select
Explorers > Voice Gateway > SIP Trunk Profiles > NatTrkWithoutRegistration.
Now it seems to me that you have
Explorers > Voice Gateway > SIP Trunk Profiles > NatTrkWithRegistration.
You also need to check the configuration CGWB, for example
CHANGE-CGWB:CGW,1,14,LEGKDATA,1,565670,NO; NO - here indicates work without registration
 
Hi masviss
The system is Hipath 4000 v4 not supporting sip trunk

So I installed sip trunk in OSBx8 and I want to pass through external calls to Hipath 4k

Hope I explained little bit clear.

Internal calls between Osb and Hipath 4k working fine and Sip trunk in osb also working fine.

The external calls of Osb sip has to pass to Hipath 4k

Thanks in advance
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top